Drive retainer lever
6 Set any jumpers on the new drive. See the drive’s documentation for further instructions.
www.gateway.com
If you are replacing a drive, go to Step 4.
1
2
3
To install a hard drive in an internal drive bay:
Important
To install a hard drive in the bottom external 3.5-inch drive bay, follow the instructions in “To install a drive in an external drive bay:” on page 39.
Installing or replacing a hard drive
Use these instructions to install or replace a hard drive.
- OR -
If you are adding a new drive to an available drive bay, slide the green drive retainer lever toward the front of the drive bay, then go to Step 7.
4 Disconnect the old drive’s cables from the front of the drive.
5 Slide the green drive retainer lever toward the front of the drive bay, then pull the drive out of the bay.

Installing drives

41