5. Mounting the ACSAR into the Console

5. MOUNTING THE ACSAR INTO THE CONSOLE
Beforeproceeding to the mechanical installationof the ACSAR unit, resulting in opening theconsole, be sure
theconsole has been switched off totally (Referto the installation manual for switching offthe console).

5.1 Installation of the ACSAR

Necessary tools

Cross point screw driver of 5 mm.

How to install the ACSAR unit in the console

1. To be able to install the ACSAR unit, remove the following covers on the console:
- Dummy cover plate (B): remove the 4 screws securing plate to console and remove the cover. Retain screws for the fixation
of the ACSAR unit. (image 5-1)
- Side cover with power switch (A): remove the 4 screws securing plate to console. Take the cover out of console frame and
putit beside the con sole(co verdis placementlimited by theground cable and the power sw itch connection). Retain screws
for reinstallationof the cover (image 5-1).
- Main power cover (C): remove the 4 screws securing plate to console and remove the cover (cover displacement limited by
theground c able). Retain screws for reinstallation of the cover. (image 5-2)
2. Carefully slide the ACSAR unit on its place in the console, taking care that the bottom of the unit rest on the provided support
(D). (image 5-3, image 5-4)
3. Secure the position of the unit with the 4 retained screws. (image 5-5)
4. Continue with the electrical connections of ACSAR power, communication and DVI.
Image5-1
Coverremoval left side console
A Side cover with power switch
B Dummy cover plate Image5-2
Coverremoval right side console
R5976519 ACSAR 12122002 13