14. ACSAR Set Ups
• Unique address: differ from “0” and “1” and is specific for that unit. The ACSAR execute the commands from the Remote
Controlif the latter is programmed on the same unique address.
ControllingACSAR
With Remote Control used addresses 0 up to 9
WithCompute r e.g. IBM PC (or compatible), Apple,MAC,
etc...
used addresses 000up to 255
• Common address: only 2 values are possible “0” or “1” (adjustable). T he ACSAR execute the commands from the Remote
Controlif the latter is programmed on the same common address.
Storing the individual address
1. From the Service menu, select item CHANGE PROJ. ADDRESS. (menu 14-12)
TheChange Projector (=ACSAR) Address menu appears on-screen and in the graphical display. This menu displays the already
stored addresses, common and unique. (menu 14-13)
2. Select the ACSAR A ddress item press ENTER or selection wheel to confirm.
Thefirst digit in the address number, composed of 3 digits, is active and ready to be changed.
3. Enter the new address number as follows:
- With the Remote Control: successivelyenter with the numeric buttons a new number. Terminate number entry by PRESSING
SELECTIONW HEEL on ACSAR (Remote Control becomes inactiveafter the address change and has to be reprogrammed
on the new address, ifbetween 0 and 9)).
- With the selection wheel: rotateselectionwheel to change the digit and press w heelto jum p to next digit. Terminate number
entry by pressing selection wheel.
Thenew value is stored or if an incorrect value has been putted in, a message ’Invalid Address’ isdisplayed indicating the correct
value range. (menu 14-14)
4. Press EXIT (RCU) or select item RETURN with selection wheel on ACS AR to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
MORE....
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
CHANGE ACSAR. ADDRESS
ACSAR ADDRESS 5
COMMON ADDRESS 0
Select with ↑or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
0HQX
ERROR
Installed Address
The ACSAR Address
is a number between
0 and 255
<EXIT> to return
0HQX
Storing the common address
1. Select the Common Address item and press ENTER or selection wheel to confirm. (menu14-15)
The address digitis active and ready to be changed.
2. Enter the new address number as follows:
- With the Remote Control: enter with the numeric buttons a new number. Terminate number entry by pressing ENTER.
- With the selection wheel: rotate selection wheel to change the digit and press wheel to terminate
Thenew value is stored or if an incorrect value has been putted in, a message ’Invalid Address’ isdisplayed indicating the correct
value range. (menu 14-16)
3. Press EXIT (RCU) or select item RETURN with selection wheel on ACS AR to return.
CHANGE ACSAR. ADDRESS
ACSAR ADDRESS 5
COMMON ADDRESS 0
Select with ↑or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
0HQX
ERROR
Installed Address
The common Address
is a number between
0 and 1
<EXIT> to return
0HQX
R5976519 ACSAR 12122002 69