14. ACSAR Set Ups
Theintended use of this option is to apply native and progressive da tato the projector and displaying it with minimum delay, using
thefull resolution of the projector. Other formats will be displayed either non scaled and/or interlaced.
This featurecan be us ed ifadditional delay in the projector is not acceptable, for instance, if an external scaler/de-interlace does
the processing.

Setting the minimum delay

1. From the Service menu, select item ADVANCED PROCESSING. (menu 14-24)
TheAdvanced Processing m enu displays only1 item, MINIMU M DELAY[ON]. The latter can be toggled to On or Off.
2. Press ENTE R ors election wheel toe nable (On) ord isable (Off)the minimum delay.
3. Press EXIT (RCU) or select item RETURN with selection wheel on ACS AR to return.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
MORE....
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
14.8 I2C Diagnosis

How to enter the I2C diagnosis menu

1. From the Service menu, select item DIAGNOSIS (menu 14-25)
The Diagnosis menu displays only 1 item, I2C. The latter is active. (menu 14-26)
2. Press ENTER or selection wheel to enter the I 2C diagnosis list.
I2C diagnosis menu displays a list of I2C addressable boards with the respective hex code. The I 2Clineischeckedon(D)ata,
(C)lockand (A)knowledge. Greencolor for D, C and A m eans no failure,red color, means failure. (menu14-27)
3. Press EXIT (RCU) or select item RETURN with selection wheel on ACS AR to return.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
MORE....
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
DIAGNOSIS
I2C
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
I2C DIAGNOSIS
DCA
PMP 4AH———
INPUT SELECTOR 74H———
LCD DISPLAY 7AH———
INPUT SELECTOR E0H———
INPUT SELECTOR E2H———
INPUT SELECTOR E4H———
LOCAL CTRL ECH———
Scroll with ↑or ↓
<EXIT> to return.
0HQX
R5976519 ACSAR 12122002 73