Barco R5976519/00, R9806700 15.3 Picture in Picture (PIP)

15. Image Alignment
15.3 Picture in Picture (PIP)
How to set up PIP
1. From the Random Access mode menu, select item PIP. (menu 15-12)
The Picture in Picture menu appears on-screen and in the graphical display. The PIP menu items allow to set up the status,
source and position ofthe inserted picture. (menu 15-13)
2. From thePIP menu, successively select item STATUS, SOURCE and POSITION and proceed to the set up.
Set up results in:
STATUS
ON PressENTER or selection wheel to toggle the PIP status to ON. PIP is enabled.
OFF PressENTER or selection wheel to toggle the PIP status to OFF.PIP is disabled.
SOURCE
WithRemote control •PressEN TER to activatethe source number. Thefirst digit is active and can bechanged.
• Enternew value, using the digit buttons on the Remote Control. Nextdigit becomes active.
• Enternew value for second digit, using the digit buttons on the Remote Control.
• Terminatesource number entry with ENTER.
Withselection wheel • Pressselection wheel to activate the source number. Thefirst digit is active and can be
changed.
• Enternew value, by rotating the selection wheel. Presswheel to confirm. Nextdigit
becomes active.
• Enternew value for second digit, by rotating the selection wheel.
• Terminatesource number entry by pressing the selection wheel.
POSITION
TOP/LEFT (1)
TOP/RIGHT (2)
BOTTOM/LEFT (3)
BOTTOM/RIGHT (4)
PressENTER or selection wheel to toggle the PIP in the desired corner on the image.
(image 15-4)
3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
IMAGE SETTINGS
PICTURE TUNING
GEOMETRY
PIP
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
PIP
STATUS [ON]
SOURCE 07
POSITION [TOP/RIGHT]
File name: video625.c05
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
82 R5976519 ACSAR 12122002