14. ACSAR Set Ups
14.3 Password Change
Overview
• About Use of Password
• Password Number Change
• Filling In the Access Control list
14.3.1 About Use of Password
Password protection Active/Not active
Passwordprotection of items in the adjustment mode is active Yes (ON) or Not (OFF), depending the position of switch2 of theD ip
switch unit S1 on theP rocessorboa rd.
Image14-3
Dipswitches on processor board
Password Users
Thesoftware has provided 3 password levels, one for the Owner, the User and the Guest. The Owner is in rang the administrator,
meaning,the owner determine which password protected items opens when the others use their password as entry.
14.3.2 Password Number Change
How to change the password number
1. From the Service menu, selectitem CHANGE PASSWORD. (menu 14-6)
Note: Enteringthe Change Pass word menu is restricted to the owner only.
TheChange password menu appe arson-screen and in the graphical display. Thismenudisplays the exiting password numbers
for owner,user and guest . (menu14-7 )
2. Select the password num ber which has to be changed and press ENTER or selection wheel to confirm.
The firstdigit in the password number is active and ready to be changed.
3. Enter the new pa ssword number as follows:
- With the Remote Control: successivelyenter with the numeric buttons a new number. Terminate number entry by pressing
ENTER.
- With the selection wheel: rotateselection wheel to change the digit and press wheel to jump to next digit. Terminate number
entry by pressing selection wheel.
When terminating number entry, the on-screen displays for a few seconds the Message ’Changed password completed’.
(menu 14-8)
R5976519 ACSAR 12122002 67