15. Image Alignment
15.7 Vertical and Horizontal Image Shift

How to shift the image

1. From the R andom Access mode menu, successively select item GEOMETRY and SHIFT.(menu 15-24)
TheHorizontal Shift bar scale appears on-screen and in the graphical display (A numeric value of “0” on the bar scale indicates
no shift correction applied).
2. Proceed to the Vertical and Horizontal shift adjustment:
Theadjustmen tcan be done with the Remote Control or with the selection wheel on the ACSAR.
Adjustment
Numericbuttons
(max. value between +255
and -255)
Changing from Vert. to
Hor. shift bar scale, press
respectivelyonce cursor key ↑
or →.
•PressENTER to activate the numeric value on the bar scale. The
firstdigit is active and can be changed.
• Enternew value (only a + or –), using the digit buttons on the
RemoteControl. Nextdigit becom es active.
• Enter new value for next digit, using the digit buttons on the
RemoteControl. Nextdigit becom es active.
• Repeatthe same action for the other digits and terminate value
entrywith ENTER.
•PressEXIT to return.
HorizontalShift
Cursor keys←and →
• Press the cursor keys ←or →to display the horizontal shift bar
scale.
• Pressthe cursorkeys ←or →until the desired horizontal shift
is obtained.
•PressEXIT to return.
With Remote
control
Vertical S hift
Cursorkeys↑and ↓
• Presst he cursor keys ↑or ↓to display the vertical shift bar scale.
• Press the cursor keys ↑or ↓until the desired verticalsh iftis
obtained.
•PressEXIT to return.
Withselection
wheel • At startup, horizontalshift bar scale is displayed.
• Rotateselection wheel until desired horizontal shift correction on screen is obtained.
• Press selection wheel to display vertical shift bar scale.
• Rotateselection wheel until desired vertical shift correction on screen is obtained.
• Presss electionwheel to confirm and return.
• Torepeat steps, press selection wheel again. (image15-7)
3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
IMAGE SETTINGS
PICTURE TUNING
GEOMETRY
PIP
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑or ↓
then <ENTER>
<EXIT> to return
0HQX
R5976519 ACSAR 12122002 87