Barco R5976519/00, R9806700 16.4 Internal Generated Testpatterns

16. Additional S et Ups

How to define the OSD position

1. From the Installation menu, select item OSD. (menu 16-7)

The OSD menu appears on-screen and in the graphical display. The OSD menu contains 2 items, color choice and position of

the OSD. (menu 16-8)

2. Select item MENU PO SITION [DEFAULT].

3. Press the EN TER keyor se lectionWheel to toggle the desired position (Default or Center) for the OSD between brackets.

- DEFAULT:the menus are displayed in the center and the adjustment boxes in the corner of the image.

- CENTER: them enus and the adjustment boxesar ed isplayedin the center of the image.

4. Press EXIT (RCU) or select item RETURN (ACSAR) to return.

INSTALLATION

INPUT SLOTS

SOURCE SWITCHING

CONFIGURATION

OSD

INTERNAL PATTERNS

NO SIGNAL

QUICK ACCESS KEYS

Select with ↑or ↓

then <ENTER>

<EXIT> to return

0HQX

OSD

HIGHLIGHTED ITEM COLOR

[YELLOW]

MENU POSITION [DEFAULT]

Select with ↑or ↓

<ENTER> to toggle

<EXIT> to return

0HQX

16.4 Internal Generated Testpatterns

How to select a testpattern

TheACSAR cangenerate 8 different testpatterns, useful for geometry, focus alignment and image evaluation.

1. From the Installation menu, select item INTERNAL PATTERNS. (menu 16-9)

TheInternal Pattern menu appears on-screen and in the graphical display. The Internal Patter menu contains 8 different internal

generated testpatterns. (menu 16-10)

2. Select the desired testpattern and press the ENTER key or selection Wheel to confirm.

The selected testpatternis displayed on the screen.

3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.

INSTALLATION

INPUT SLOTS

SOURCE SWITCHING

CONFIGURATION

OSD

INTERNAL PATTERNS

NO SIGNAL

QUICK ACCESS KEYS

Select with ↑or ↓

then <ENTER>

<EXIT> to return

0HQX

INTERNAL PATTERNS

OUTLINE

HATCH

COLOR BARS

MULTIBURST

CHECKER BOARD

PURITY

PAGE CHAR

ALPHA-NUMERIC CHARS

Select with ↑or ↓

then <ENTER>

<EXIT> to return

0HQX

Outline

Hatch

Colorbars

Multiburst

Checkerboard

Purity

Alphanumeric

Page Character

Green Red Blue

123456789AZERTYUIOPabhdksol123456

EEEEEEEEEEEEEEEEEEEEEEEEEEEEE

123456789AZERTYUIOPabhdksol123456

Barco R5976519/00, R9806700 16.4 Internal Generated Testpatterns

How to define the OSD position

1. From the Installation menu, select item OSD. (menu 16-7)

The OSD menu appears on-screen and in the graphical display. The OSD menu contains 2 items, color choice and position of

the OSD. (menu 16-8)

2. Select item MENU PO SITION [DEFAULT].

3. Press the EN TER keyor se lectionWheel to toggle the desired position (Default or Center) for the OSD between brackets.

- DEFAULT:the menus are displayed in the center and the adjustment boxes in the corner of the image.

- CENTER: them enus and the adjustment boxesar ed isplayedin the center of the image.

4. Press EXIT (RCU) or select item RETURN (ACSAR) to return.

0HQX

0HQX

How to select a testpattern

TheACSAR cangenerate 8 different testpatterns, useful for geometry, focus alignment and image evaluation.

1. From the Installation menu, select item INTERNAL PATTERNS. (menu 16-9)

TheInternal Pattern menu appears on-screen and in the graphical display. The Internal Patter menu contains 8 different internal

generated testpatterns. (menu 16-10)

2. Select the desired testpattern and press the ENTER key or selection Wheel to confirm.

The selected testpatternis displayed on the screen.

3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.

0HQX

0HQX

Image16-1

Internalgenerated testpatterns

R5976519 ACSAR 12122002 93