Bay Technical Associates 525H, 5218H, 528H, 529H owner manual Section

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

By responding to the Enter Request: message at the end of the main configuration menu (see Section 6.1) with "4" (Set Data Block Length), you may change the data block length used in Mode 6.

The multiport will respond with:

Current Block Length is	032
Enter Block Length (1 to 250)	:

NOTE: Carriage Return is required after the new length.

Enter the block length that you desire, followed by Carriage Return. For example, if you enter "100" and Carriage Return, the multiport will respond with:

Current Block Length is	100
Save Changes Permanently? (Y/N):

If you answer "Y" (yes), the new block length will be saved in non-volatile memory, and the multiport will subsequently power-up at that new length. If you answer "N" (no), the new data block length will be stored in RAM and will be lost upon next power-up. The multiport will now return to the main configuration menu (see

Section 6.1).

30