Bay Technical Associates 528H, 5218H, 529H, 525H owner manual Mode of Operation

￿￿! ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

By responding to the Enter Request: message at the end of the main configuration menu (see Section 6.1) with "6" (Set Mode of Operation), you may change the current mode of operation. The multiport will respond with:

MODE OF OPERATION
Full Duplex Communication	1
All Messages from All Ports	2
Single Message from All Ports	3
All Messages from Selected Port	4
Single Message from Selected Port	5
Time Division Multiplexer	6
Exit	X
Current Mode is: 1
Enter request:

You may now enter the mode of operation that you wish. The multiport will respond with:

Save Changes Permanently? (Y/N):

If you answer "Y" (yes), the new mode will be saved in non-volatile memory and will become the new power-up mode. If you answer "N" (no), the new mode of operation will be stored in RAM and will be lost upon next power-up. The multiport will now return to the main configuration menu (see Section 6.1).

￿￿￿"￿￿

By responding to the Enter Request: message at the end of the main configuration menu (see Section 6.1) with capital "X" (Exit), you will exit the configuration mode and return to the operation mode.

32