Reference Guide for the Model RM356 Modem Router
Filter Configuration 8-11
Implementing the Filter
Now you can proceed to define a call filter to block the three NetBIOS service ports.
The Filter Set Configuration Menu is shown in Figure 8-3.
To define a call filter:
1. Go to Menu 21 - Filter Set C onfiguration, and choose a name and filter set.
Figure 8-3. Menu 21 Filter Set Configuration
2. Next, define the filter rules.
You want your filter to ignore (drop) UDP and TCP packets originating from ports 137, 138,
and 139. Because each protocol/port combination must be specified as a separate rule, there
will be six rules. Each filter set contains six rules, so you will fill one entire set. Begin with
rule 1, as illustrated in Figure8-3.
Menu 21 - Filter Set Configuration
Filter Fil ter
Set # Commen ts Set # Comments
------ ----------- ------ --- --- -----------------
1 netbios 7 _______________
2 __________ _____ 8 _______________
3 __________ _____ 9 _______________
4 __________ _____ 10 _______________
5 __________ _____ 11 _______________
6 __________ _____ 12 _______________
Ente r Filter Set Number t o Configure= 1
Edit Comments= netbios
Press ENTER to Confirm or E SC to Cancel: