Reference Guide for the Model RM356 Modem Router
8-14 Filter Configuration
Applying the Filter
When the filter design is finished, you must tell the router where to apply the filter. Apply it as a
Call Filter in the remote node that reaches your DNS server(s) (usually your ISP node). Go to
Menu 11.1, Remote Node Profile, and enter the number of the filter under “Call Filter Sets” as
shown in Figure8-6. If you have multiple filters, you can cascade up to four by entering their
numbers separated by commas.
Figure 8-6 shows the Remote Node Profile Menu.
Figure 8-6. Remote Node Profile Menu
When you finish, restart the router.
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Edit PPP Options= No
Active= Yes Rem IP A ddr= 0.0.0.0
Call Direction= Ou tgoing Edit IP= No
Incoming: Telco Op tion:
Rem Login= Transf er Type= 64K
Rem Password= ** ****** Alloca ted Budget(min)= 0
Rem CLID= N/A Period (hr)= 0
Call Back= N/A
Outgoing: Session Options:
My Login= netgea r Input Filter Sets=
My Password= *** ***** Outp ut Filter Sets=
Authen= CHAP/PAP Call F ilter Sets= 1 <<- APPLY
Pri Phone #= 18005551212 Idle Timeout(sec)= 300
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel: