WEB CONFIGURATION
Web Interface – Encryption
IMPORTANT: Use the following encryption information only if your network is encrypted. If it is not, leave the encryption mode (“WEP Mode” in the dialog box illustrated below) set to its default, “Disabled”.
This menu allows you to activate your Print Server’s encryption feature, which is determined by your existing LAN encryption setting.
To set encryption for your Print Server choose the matching setting in the dialog box above. The following briefly explains the various settings your software makes available:
•64-bit manually: Selecting this setting will allow you to enter your
64-bit keys, if your wireless network uses 64-bit encryption (see dialog box on the next page).
•64-bit automatically: Selecting this setting will allow you to enter a pass phrase to automatically generate encryption keys for your Print Server. (Caution: This choice can generate new keys that will not function with an existing network. If your network keys [in your router] are already set, use manually instead.)
•128-bit manually: Selecting this setting will allow you to enter your 128-bit keys, if your existing wireless network is encrypted using 128-bit encryption.
