Belkin F1UP0001 user manual Web Interface - Channel and SSID, Web Configuration

WEB CONFIGURATION

Web Interface – Channel and SSID

This menu allows the user to program the wireless settings.

•“Enable Wireless Networking” is on by default. Connecting the Print Server via an Ethernet cable to the network will automatically disable wireless networking.

•“SSID” is the wireless name of your network. The default setting is “ANY”. This allows the Print Server to connect to the first wireless network it sees. Running the Wizard automatically changes “ANY” to the network SSID found during the setup procedure.

•“Network Type” refers to either an Infrastructure or Ad-Hoc network. Any network with a wireless router or access point is considered an Infrastructure network (default).

•“Channel” is only applicable for Ad-Hoc installations. In infrastructure networks, the wireless router or access point sets the channel automatically.

•To see wireless networks in your area and choose the one you wish to connect to, see “Web Interface – Site Survey” on the next page.

15