EN-14
Connecting and Configuring
your Modem Router
EN-14
section
1
4
5
6
7
8
9
10
Verify the contents of your box. You should have the following:
• Belkin N1 Wireless Modem Router
• RJ11 Telephone Cord
• RJ45 Ethernet Networking Cable
• Power Supply
• Belkin Setup Assistant Software CD
• User Manual
Setup Assistant
Belkin has provided our Setup Assistant software to make installing
your Modem Router a simple and easy task. You can use it to get
your Modem Router up and running in minutes. The Setup Assistant
requires that your Windows 2000 or XP computer be connected
directly to your ADSL line and that the Internet connection is active
and working at the time of installation. If it is not, you must use the
“Alternate Setup Method” section of this User Manual to configure
your Modem Router. Additionally, if you are using an operating system
other than Windows 2000 or XP, you must set up the Modem Router
using the “Alternate Setup Method” section of this User Manual.
Brand New Setup
Follow these steps if you are not
replacing an existing modem. If you are
replacing an existing modem, go to the
next section.
A. Unpack your new Modem Router
from the box and place it next to
your computer. Raise the Modem
Router’s antennas.
3
2
modem router
computer
Step 1 Hardware Connections – Follow the Quick Installation
Guide (QIG)