WEB INTERFACE
Table of Contents | sections | 1 | 2 |
Administration > Server Access List
By default, access is allowed to all servers for administrators.. For other users, define the access rights of each user separately..
To do so:
1.From the menu, click “Server Access List”.. The Access List Configuration window will appear (see Figure 18)..
Figure 18 Server Access List Configuration
2.Select a user from the user drop-down menu..
345
3.Check the target servers the user can access (according to his or
her access permissions).. To select all target servers, click 
..
4.Click 
to save the selection..
5.Repeat the steps above for additional users..
Security > Settings
Configure the security features, such as Account Blocking, Password Policy, and Idle Timeout, as explained below..
From the Security section, click “Settings”.. The “Security > Settings” page appears (see Figure 19)..
Figure 19 Security Settings
OmniView® SMB CAT5 216/232 Switch | 21 |
