Belkin Power Supply

Belkin Power Management Software

2. Hardware Installation

Please go by the following steps:

a. Connect the Serial/USB cable to the battery backup’s

communication port.

PC CABLE UPS

b. Connect the Serial/USB cable to the PC’s

communication port.

c. Make sure the communication port selector on the

back of the battery backup is either on “USB” or

RS-232 (Serial). Only one communication port can be

used. Do not connect both USB and Serial at the

same time.

d. If the computer has never been connect with a USB

cable before, then the screen will pop up a small

window informing you that the new hardware has

been found and it will automatically setup the system.

e. If the operating system is Window 98, please follow

the steps below to install the USB driver.