Belkin Power Management Software
to ‘control panel->service’ and check if ‘Rupsmon’ service
has started.
Belkin Power Management
Software is operating normal
Belkin Power Management
Software service is not
operated or the software cable
is disconnected
If you want to change the function configuration, please
run the Belkin Power Management Software in the task
bar directly or select "Belkin Power Management Software
for Windows" from "Belkin Power Management Software"
in program group of start menu in Windows.
3.3.2. Uninstall Belkin Power Management Software
After installation, there are 4 selections as below under
"Belkin Power Management Software" in Windows start
menu. If you want to remove the teh software from the
system, please select "Belkin Power Management
Software Uninstall".
♦ Belkin Power Management Software for Windows：Enter
into Belkin Power Management Software main function
figure
♦ Belkin Power Management Software Help：Belkin Power
Management Software introduction
10