Belkin Power Management Software
SIMPLE INSTALLATION Windows 98, NT, 2000, Me, XP,2003
♦ Hardware Installation
a. Connect the Serial/USB cable to the battery
backup’s communication port.
b. Connect the Serial/USB cable to the PC’s
communication port.
c. Make sure the communication port selector on the
back of the battery backup is either on “USB” or
RS-232 (Serial). Only one communication port can
be used. Do not connect both USB and Serial at the
same time.
♦ Software Installation
a. Insert the Belkin Power Management Software CD
to the CD-ROM. The software will display the
installation menu, or your can select ‘run’ from
windows start menu and execute ‘setup.exe’.
Belkin Power Management Software files will be
copied into the directory you appointed. When the
software has been launched, the operating system
will select the local language in the software for
displaying. If there is no preferred language, the
Software will default to use English interface.
b. ( D efa u l t : C:\Program Files\Belkin\Belkin Power Management
Software)
c. After installation. For Windows 95/98, check if there
is a ‘Rupsmon Daemon’ icon in task bar. For
Windows NT, go to ‘control panel->service’ and
check if ‘Rupsmon’ service has started
d. Click ‘Belkin Power Management Software’ for
parameter settings.
e. Click ‘Select UPS’ to monitor local or remote UPS.
f. Click ‘Settings’ to set ‘Communication Type’ and
‘Select Comm Port’. If you see ‘Communication
with UPS’ on the main screen, this means you have
connected with UPS.
---For More Parameters, Please Reference Other Topics---
1