Belkin Power Management Software
♦ Enable Pager:
In this function, the users can set the messages to the
system administrator by pager. The configuration's mode
and screen is as below.
Modem connected to: set the communication port,
which connects with the Modem. The setting value is
COM1-COM4.
Event: As listed above. Pager number: Input the
pager number. If necessary, please input the prefix
code for outside line first, then add "," for 0.5 second
delay time, the full pager numbers at last.
Code to send: you can input the event code for
sending.
22