Belkin Power Supply

Belkin Power Management Software

3.4.1. UPS dynamic display area

This area displays some relevant information about the

UPS. Users can select different display mode, such as

meter, digital, block and chart. The information includes

input voltage, output voltage, line frequency, battery

capacity, load, temperature etc.

3.4.2. UPS Status Area

After the software is installed, check whether the UPS is

connected to the computer, and the AC power is in normal

range. The status of the UPS power supply and some

relevant information of the UPS are displayed.

3.4.3. Function selection area

After a successful installation, you can start to configure

the parameter value. Each parameter value will affect the

normal operation of the software program. Please

configure the parameter value of the different function

options, according to the following chapter.

3.4.3.1. Select UPS

Configure Belkin Power Management Software: Monitor

local UPS or Monitor remote UPS. The method: press

"select UPS" for the selection - as shown below.