Belkin Power Management Software
3.2. Software Installation
The SETUP program is required for Belkin Power
Management Software installation. After installation, the
files will be copied to the “Belkin\Power Management
Software” directory.
Following the steps below:
a. Turn on UPS and PC.
b. Place the Belkin Power Management Software CD
into CD ROM. Belkin Power Management Software
will display the installation menu, or you can select
‘run’ from windows start menu and execute
‘setup.exe’.
c. After installation, Belkin Power Management Software
files will be copied into the directory you appointed.
When the software has been launched, the operating
system will select the local language in the
software for displaying. If there is no
preferred language the software will use English
interface instead.
(Default: C:\Program Files\Belkin\Belkin Power
Management Software)
3.3. Start-up and Uninstall Belkin Power Management
Software
3.3.1. Start-up Belkin Power Management Software
After installation, please restart the computer. For
Windows 95/98/Me, check if there is a ‘Rupsmon
Daemon’ icon in task bar. For Windows NT/2000/XP, go
9