Belkin Power Supply

Belkin Power Management Software

[a] Turn off UPS after System Shutdown

Set this value to YES if you want Belkin Power

Management Software to turn off the UPS after shutting

down the system. Set this value to NO If you want the

UPS to continue providing output power until its batteries

get drained. Belkin Power Management Software would

not be able to reboot the system automatically if this value

was set to NO.

[t] Time Scheduling (hh:mm)

Set various startup and shutdown times for every day for

the week. Belkin Power Management Software for Unix

powers down and reboots the system based on this preset

weekly schedule. When the scheduled time to shutdown

approaches, Belkin Power Management Software for Unix

will send periodic alerts to inform users to save files, close

jobs and log out of the system.

[s] Save Configuration.

Saves all modified parameters.

[q] Quit.

Quit configuration without

saving changes.

4.3.2. Communication Port

Set option [k] to Monitor UPS from local serial port if you

intend to use Belkin Power Management Software to

monitor a UPS attached to your system’s serial port.