Belkin Power Management Software
4.4. Using Belkin Power Management Software for Unix
4.4.1. Using the "Belkin Power Management Software"
program
After a successful installation, Belkin Power Management
Software for Unix will become a background process at
system startup. It is not necessary to start the background
process manually. Belkin Power Management Software
for Unix automatically detects and applies the
modifications made in the configuration menu.
Use these commands to execute any of the six options provided
in the software program.
Start the Belkin Power Management Software for Unix
daemon process:
“/etc/belkin/belkin start”
Stop the Belkin Power Management Software for Unix
daemon process:
/etc/belkin/belkin stop
Configure the parameters:
/etc/belkin/belkin config
(see 4.5.3)
47