Belkin Power Supply

Belkin Power Management Software

 Send Notification to the same pager number ：

Select this check box to send all messages to the

same pager and enter the relevant pager number in

the AC Failure field.

For instance: Set the Modem connect to COM2 and dial

“0” to access an outside line, and pager number is

“0,947123456” and "#1234#"means AC power failed.

(Attention: The action should be done within 20

seconds from calling pager number to sending code

transmission.)

D. Automatic Shutdown Time Parameters

UPS allows the users some time to shut down the system

before the UPS battery is exhausted. The characteristic

configuration of the UPS makes it so the system can be

restarted and operated normally.

♦ After AC Failure, Commence Computer Shutdown

Sequence in: Set the continuous time for system

operation after AC power fails. Please refer to the UPS

hardware manual or consult to the UPS supplier before

your configuration.

.settings range:0~2880 mins

.default value:10 mins

♦ If Low Battery Occurs, Commence Shutdown Sequence

in: Set some time for system's continuous operation

when battery low. For the setting value, the smaller is the

better.

.settings range:0 ~600 mins

.default value:1 mins