LTO
LTO
TM
2
Introduction
Thankyou for choosing the ALTO Mobile UCSPRO-RM2Programmer for the Alto Mobile UCS PRO digital
signalprocessor. The UCSPRO-RM2 provides an alternative to using a Personal Computer (PC) for setting
thevarious functions of the UCS PRO. It is primarily designed to be bolted to the UCS PRO but can be
detachedand, using an optional extension data cable, used remote from the main unit (such as handheld at
thedriver's seat) during system set-up.
Whileunable to offer the advanced graphics interface available when using the PC Editor, the UCSPRO-RM2
doesoffer all the same control and set-up functions. It does this via a very intuitive set of controls, a multi-
layermenu system, and its own backlit LCD display.
TheUCSPROisa2input,6 output device offering several forms of signal processing designed to
manipulateand enhance the audio signal in a number of ways. These include multiband parametric
equalization,high-pass and low-pass filters, digital channel delay (time alignment), phase alignment,
multichanneldynamic control (compressor/limiter), noise gating and full input/output gain setting in the
digitaldomain. The addition of the UCSPRO-RM2 makes the UCS PRO a completely self-contained "car
audiotweaker's paradise", allowing system set-up, further fine adjustment and preset selection to be done at
anytime without the need to hook-up a computer.
Wehave attempted to provide detailed instructions in this manual, but it does assume that the person
installingand setting up the equipment already has a good level of knowledge of the subject. If you have had
yourUCS PRO professionally installed and set-up for you, please be aware that altering the settings may
damageaudio system components.
TheUCS PRO has a password access system that your installer may have set in modeto
safeguardthe settings. If you are unable to access menu items with the UCSPRO-RM2, check with your
dealer.
NOTE:Lock
TM