LTO
LTO
TM
4
CONNECTINGTHE RM2 TO THE UCS PRO
Ensurepower to the UCS PRO and the rest of the audio system is .
Ateach side of the panel of the UCS PRO that carries the 25-pin connector, remove the bolts securing the
coverof the UCS PRO*. You will need a suitable Allen key to remove these bolts.
( The top cover of the UCS PRO may also be completely removed, rotated 180 degrees and refitted so that
theinscription faces forward. We recommend your dealer does this for you).
AD-SUB 25-pin male terminal on the UCS PRO mates with the recessed 25-pin female socket on the rear of
theUCSPRO-RM2 Programmer. The connectors are shaped in such a way that they will fit together only
whencorrectly aligned.
Line-upthe two terminals carefully and then gently exert even pressure, bringing both parts together so that
theterminals mate correctly.
DONOT APPLY EXCESSIVE FORCE.
Thereshould be no need to apply more than moderate pressure when bringing the two devices together. The
extendedside panels of the UCSPRO-RM2 will help to correctly align the two devices.
Thetwo devices should fit together without a gap between them, and the fixing holes should align at each
side.Secure the RM2 to the UCS PRO by bolting the extended side panels of the RM2 to the sides of the
UCSPRO using the mounting bolts provided.
switchedOFF
*