Billion Electric Company BiPAC 8500/8520, BiPAC 8501/8521 user manual Rear Ports of BiPAC

Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router

The Rear Ports of BiPAC 8521

6 5 4 3 2 1

Port

1 Power Switch

2 PWR

3RESET

LAN

41X — 4X

(RJ-45 connector)

5CONSOLE

LINE

61X — 2X

(RJ-11 connector)

Meaning

Power ON/OFF switch

Connect the supplied power adapter to this jack.

To be sure the device is being turned on->press RESET button for:

1-3 seconds: quick reset the device.

Press 6 seconds above to power off the device, then power on the device to restore the factory default settings. (Used when cannot login to the router or forgot your Username/Password. Press the button for more than 6 seconds).

Caution: After pressing the RESET button for more than 6 seconds, to be sure you power cycle the device again.

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.

Connect a PS2/RS-232 cable to this port when connecting to a PC’s RS-232 port (9-pin serial port).

Connect the supplied RJ-11 (“telephone”) cable to this port when connecting to SHDSL line.

11

Chapter 2: Installing the router