Billion Electric Company BiPAC 8500/8520, BiPAC 8501/8521 user manual Advanced Options PPPoE

Models: BiPAC 8501/8521 BiPAC 8500/8520

1 171
Download 171 pages 17.46 Kb
Page 61
Image 61

Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router

Advanced Options (PPPoE)

LLC Header: Selects encapsulation mode, true for using LLC or false for using VC-Mux.

Create Route: This setting specify whether a route is to be added to the system after IPCP (Internet Protocol Control Protocol) negotiation is completed. If set to enabled, a route will be created which directs packets to the remote end of the PPP link.

Specific Route: Specify whether the route created when a PPP link comes up is a specific or default route. If set to enabled, the route created will only apply to packets for the subnet at the remote end of the PPP link. The address of this subnet is obtained during IPCP negotiation.

Subnet Mask: set the subnet mask used for the local IP interface connected to the PPP transport. If the value 0.0.0.0 is supplied, the netmask will be calculated from the class of the IP address obtained during IPCP negotiation.

Route Mask: Set the subnet mask used by the route that is created when a PPP link comes up. If it is set to 0.0.0.0, the subnet mask is determined by the IP address of the remote end of the link. The class of the IP address is obtained during IPCP (Internet Protocol Control Protocol) negotiation.

MRU: Maximum Receive Unit. This is negotiated during the LCP protocol stage.

57

Chapter 4: Configuration

Page 61
Image 61
Billion Electric Company BiPAC 8500/8520, BiPAC 8501/8521 user manual Advanced Options PPPoE