Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
Advanced VLAN Setup Example (Triply Play)
VLAN_data:
Ethernet Port 1, Wireless and Wireless WDS are reserved for Internet
-On Ethernet port 1 I also need VC 0/40 bridged.
VLAN_Vedio
Ethernet ports: 2, 3 and 4:
-0/33
-0/34 Video
-0/35 Video
-0/36 Video Subscriber Services (EPG, EAS, etc.)
-0/37 Video
-0/38 Video
-0/39 Spare
Step 1: Setup Member Ports
Go to Configuration LAN Bridge Interface.
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two VLAN groups need to be created first.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN Port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
Bridge Interface | VLAN Port (Always starts with) | ||
Ethernet | P1 | / P2 | / P3 / P4 |
Ethernet1 | P2 | / P3 | / P4 |
Ethernet2 | P3 | / P4 |
|
Ethernet3 | P4 |
|
|
Step 2: Create WAN Interface
Go to Configuration WAN ISP
wanlink is the factory default WAN interface which provides service for data/internet access. If your ISP uses this access protocol, click Edit to input other parameters if needed. If your ISP does not use PPPoE, you can change the default WAN connection entry by clicking Change.