Billion Electric Company BiPAC 8500/8520, BiPAC 8501/8521 Packet Filter Add TCP/UDP Filter

Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router

Packet Filter – Add TCP/UDP Filter

•Rule Name: User-define description to identify this entry or click to select existing predefined rules. The maximum name length is 32 characters.

•Time Schedule: It is self-defined time period. You may specify a time schedule for your prioritization policy. For setup and detail, refer to Time Schedule section

•Source IP Address(es) / Destination IP Address(es): This is the Address-Filter used to allow or block traffic to/from particular IP address(es). Selecting the Subnet Mask of the IP address range you wish to allow/block the trafficn direction; set IP address and Subnet Mask to 0.0.0.0 to inactivate the Address-Filter rule.

Tip: To block access, to/from a single IP address, enter that IP address as the Host IP Address and use a Host Subnet Mask of “255.255.255.255”.

•Type: It is the packet protocol type used by the application. Select either TCP or UDP or both of TCP/UDP.

•Source Port: This Port or Port Ranges defines the port allowed to be used by the Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is recommended that this option be configured by an advanced user.

•Destination Port: This is the Port or Port Ranges that defines the application.

•Inbound / Outbound: Select Allow or Block the access to the Internet (“Outbound”) or from the Internet (“Inbound”).

Click the Apply button to apply your changes.

85

Chapter 4: Configuration