Billion Electric Company BiPAC 8501/8521, BiPAC 8500/8520 user manual SHDSL-BiPAC

Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router

SHDSL-BiPAC 8500

•Mode: The SHDSL device can function as a CPE (Customer Premises Equipment) or CO (Central Office). Select CPE mode when the BiPAC 8500 is connected to your ISP.

•Back – to –back: it is a direct connection between two SHDSL devices with one being set to CPE and the other is set to CO by using a standard RJ-11 telephone cable.

•Annex Type: It is the DSL operating mode standard. Select Annex A or Annex B to support up to 2.3Mpbs SHDSL function. Select other annex such as Annex B_ANFP / Annex A_B_ANFP, you may consult with your ISP first.

•Back – to –back: to be sure the Annex type is the same on the BiPAC 8500 and the remote router.

•Bit Rate Mode: The mode selections are Adaptive and Fixed. Selecting the Adaptive mode, the best connection rate will be automatically negotiated with the CO / ISP. Selecting the Fixed mode, the connection rate will be fixed to the specific fixed bit rate selected with the CO / ISP.

•Fixed Bit Rate: Specify the fix transfer rate when Fixed Mode is selected. Specify the maximum transfer rate when Adaptive Mode is selected. Bit Rate range is from 200kbps ~ 2312kbps.

•Activate Line: Line active true is set by default. Select false to disable and true to enable SHDSL SHDSL connection

Note: Once Active Line is selected as false, you must enable the Active Line to true again and click the Apply button to reactivate SHDSL connection.

•DSP Firmware Version: Display the SHDSL line code firmware version.

•Connected: Display current SHDSL line sync status.

•State: Display current SHDSL line status.

64

Chapter 4: Configuration