
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
Provider (ISP) automatically or not. Please click Obtain an IP address automatically via DHCP client to enable the DHCP client function or click Specify an IP address to disable the DHCP client function, and specify the IP address manually. The setting of this item is specified by your ISP.
•Authentication Protocol Type: Default is Chap (Auto). Your ISP will advise you whether to use Chap or Pap.
•Connection:
oAlways on: If you want the router to establish a PPPoA session when starting up and to automatically
oConnect to Demand: If you want to establish a PPPoA session only when there is a packet requesting to access the Internet (i.e. when a program on your computer attempts to access the Internet).
•Idle Timeout:
oDetail: You can define the destination port and packet type (TCP/UDP) without being checked by the timer. It allows you to set which outgoing traffic will not trigger and reset the idle timer.
•RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
•MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media- specific headers) that IP will attempt to send through the interface.
•TCP MSS Clamp: This option helps to auto detect the optimal MTU size. Default is enabled.
51