Binatone 2005 TWIN Set the Auto Answer, Base Settings De-register a Handset, Change the Dial Mode

8.3.6Set the Auto Answer

If you turn on the Auto Answer, you can answer a call automatically by just lifting the cordless handset off the charger without having to press any key.

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select AUTO ANSWER.

3.Press <MENU/OK> and <UP/DOWN> to turn on or off the auto answer feature.

4.Press <MENU/OK> to confirm.

8.4Base Settings

8.4.1De-register a Handset

This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced.

You will need to enter the 4-digit system PIN in order to de-register a handset from the base station. (The default PIN is 0000.)

A de-registered handset will have the antenna icon flashing and REGISTER on the display.

Note: You cannot de-register the handset that you are currently using.

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DELETE HS.

3.Press <MENU/OK> to show PIN?

4.Enter the 4-digit system PIN.

5.Press <MENU/OK> and the first registered handset number is shown.

6.Press <UP/DOWN> to step through the list of registered handsets and select the one that you want to de-register.

7.Press <MENU/OK> to confirm, and the chosen handset will be de-registered.

8.4.2Change the Dial Mode

You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only recognises PULSE dialling.

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.

3.Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE. (The current setting is indicated by an asterisk to the right.)

4.Press <MENU/OK> to confirm.

29