Binatone 2005 TRIPLE, 2005 TWIN manual Change the Recall Flash Time, Change the System PIN Code

8.4.3 Change the Recall (Flash) Time

You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM (300ms) or LONG (600ms).

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.

3.Press <MENU/OK> and <UP/DOWN> to select your desired flash time (SHORT, MEDIUM, LONG, with the current setting indicated by an asterisk to the right).

4.Press <MENU/OK> to confirm.

8.4.4Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorised use. The default system PIN code is 0000.

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.

3.Press <MENU/OK> to show PIN?

4.Enter the old system PIN.

5.Press <MENU/OK> to show NEW PIN?, and enter the new system PIN.

6.Press <MENU/OK> to show CONFIRM?, and enter the new system PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at Step 5 again.

7. Press <MENU/OK> to confirm.

8.4.5 Reset your Cordless Handset

You can reset your phone to the default settings. After reset, all your personal settings, call list entries and redial list entries will be deleted, but your phonebook remains unchanged.

1.Press <MENU/OK> and <UP/DOWN> to select DEFAULT.

2.Press <MENU/OK> to show PIN?

3.Enter the 4-digit system PIN (default value 0000).

4.Press <MENU/OK> to show CONFIRM?

5.Press <MENU/OK> to confirm, and the phone will be reset to its default settings.

30

.