Binatone 2005 TRIPLE, 2005 TWIN manual Troubleshooting, Problem Cause Solutions

10TROUBLESHOOTING

If you have difficulty with your phone, please try the suggestions listed below.

Problem	Cause	Solutions
	a. The connection cord of the base	a. Check the connections. Unplug
		and plug back in the mains.
	station is not plugged in.	Check that the telephone line cord
No dialling tone when pressing the	b. The adapter cord is not plugged in	has been plugged into the base
	correctly in the base station.	station and the phone socket.
<TALK> key
	c. The line is busy, as another	b. Check the base station plug and
	handset is used.	the 230V plug (remove and plug-in).
	d. Wrong telephone line cord.	c. Wait until the line is unoccupied.
		d. Use the original telephone line cord
		supplied.
When connected to a PBX, no and/or	Dialling prefix is needed.	Insert the dialling prefix
wrong connection after dialling.
"OUT OF RANGE" is displayed.	a. Base station out of range.	Reduce the range.
	b. Base station not connected to
		Connect base station to mains.
	mains.
The call does not work.	Service not activated or wrong	Check your Subscription with network
	operator or wrong setting	or change the dial mode.
No display.	Empty battery	Recharge battery

Please contact the technical support of the network provider for further information.

This telephone is not equipped with an earth function! Therefore some of the functions may be limited when used in PBX systems.

If the fault persists:

Disconnect all other instruments connected to the same line as this, and try to make a call.

Disconnect the base unit from the telephone line and plug a different phone into the master socket. Try making a call. If this works the line is ok.

If the call does not work, and you are using a two-way socket adapter, remove it and plug the telephone directly into the socket. If the call now works, the adapter may be faulty.

32