8.1.4 Set the Date
1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2.Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3.Press <MENU/OK> and <UP/DOWN> to select SET DATE.
4.Press <MENU/OK> and then enter the date in the format you set in Section 8.1.1.
5.Press <MENU/OK> to confirm.
Note: If the date has been set before, the current date will display, otherwise it will show the date starting from
8.2Alarm Settings
You can set an alarm time on the handset. When an alarm is set, the <ALARM Icon> is shown on the handset display.
When the alarm time is reached, the <ALARM icon> and “ALARM ON” flash on the handset display and the alarm melody plays for 45 seconds. You can press any key to disable the alarm. If the snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes.
Note:
a.A key press will still disable the alarm even if the handset keypad is locked when the alarm rings.
b.The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level.
c.During an external call or internal call, if an alarm is set and when the alarm time is reached, the <ALARM icon> and “ALARM ON” will still flash. An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once the user presses any key or presses and holds <OFF> to disable the alarm, it will revert to the call duration screen.
d.During paging or ringing, the alarm will not sound when the alarm time is reached. However, if the snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of the snooze period.
8.2.1Turn on/off the Alarm
1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2.Press <MENU/OK> to show ALARM.
3.Press <MENU/OK> and <UP/DOWN> to select ON/OFF.
4.Press <MENU/OK> to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
26
.
