Binatone 2005 TWIN Redial a Number from the Redial List, Store a Redial Number into the Phonebook

4.9.1Redial a Number from the Redial List

1.In idle mode, press <DOWN/REDIAL> to access the redial list.

Note: If the redial list shows a name, press the < # > key to view the number of this entry.

2.Press <UP/DOWN> to browse the redial list.

3.Press <TALK> / <SPEAKERPHONE> to dial to the selected redial number.

Note: If there are no numbers in the redial list, the display shows“ EMPTY ” .

4.9.2Store a Redial Number into the Phonebook

1.Follow Steps 1 and 2 in section 4.9.1.

2.Press <MENU/OK> to show ADD TO PB.

3.Press <MENU/OK> and then enter the name you want it to have in the phonebook.

4.Press <MENU/OK> and then modify the number, if necessary.

5.Press <MENU/OK> to show <MELODY 1>.

6.Press <UP/DOWN> to browse the melody list. The respective melody will be played when browsing the melody list.

(Note: The selected melody will only be played when you receive a call if you subscribe to Caller Display and the incoming number matches the stored number.)

7.Press <MENU/OK> to confirm, and the entry will be stored.

4.9.3Delete a Redial Number

1.Follow Steps 1 and 2 in section 4.9.1.

2.Press <MENU/OK> and <UP/DOWN> to select DELETE.

3.Press <MENU/OK> to confirm, and the entry will be deleted.

4.9.4Delete All Redial List Entries

1.Follow Steps 1 and 2 in section 4.9.1.

2.Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.

3.Press <MENU/OK> to display CONFIRM?.

4.Press <MENU/OK> to confirm. All entries will be deleted and the display will show EMPTY.

Using the corded base:

4.10Making a call

1.	Pick up the corded handset or press < SPEAKER> on the corded base.
2.	Enter the phone number.

WARNING: There will be a 3-second delay, after picking up the corded handset or pressing the <SPEAKER> button, before any digits will dial out, but any digit keys pressed during this time will still be detected and the numbers will be dialled out after the delay period.

17