9REGISTRATION
IMPORTANT: When you purchase your phone system, all handsets are already registered to your base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset has become faulty.
You can register additional handsets to have up to five handsets per base unit, with each handset's number (1 to 5) shown on its display.
(Note: each handset can only be registered to one base.)
To check whether a handset is registered, make sure mains power to the base unit is switched on and the handset is within range. The handset's display should show its number and the <Antenna icon> should be steadily
on. If the display shows "REGISTER", you need to register the handset again using the following process:
On the cordless handset:
1.Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.
2.Press <MENU/OK> to display “ PIN ?”, enter the
3.Press <MENU/OK> and the display will flash “PLEASE WAIT”.
On the base:
4.At the same time, press and hold the <FIND> key for about 5 seconds or until it beeps, to indicate the base is in registration mode.
5.A confirmation beep is played to indicate successful registration, and the handset returns to idle mode with its handset number displayed and the antenna icon steady.
If registration fails, the handset beeps and the display returns to show REGISTER and the antenna icon continues to flash.
31
