Bissell 7901 warranty Operations, Before You Clean Carpets, Machine Preparation, PreTreating

		Operations
		Before You Clean Carpets
		Plan activities to give carpet time to dry.
1.
		Remove easily moved furniture from the room (chairs,
2.
		lamps, coffee tables, etc).
		Vacuum thoroughly to pick up loose debris and pet hair
3.
		before using the ProHeat.
		Plan your cleaning route to leave an exit path. It is best
4.
		to begin cleaning in the corner farthest from your exit.
	Machine Preparation
		Set up the machine following instructions in
1.
		The Features section, pages 6-9.
2.		Use Fiber Cleansing Formula in the SmartMix tank when
		cleaning carpets, stairs or upholstery. Use clean water in
		the SmartMix tank for gentle cleaning, rinsing, or when
		applying carpet protectant.
3.		Choose the SmartMix setting to match the
		cleaning job.
4.		Set the ReadyTools switch to either Tools/PreTreat or
		Floor Cleaning.

PreTreating

Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet, high traffic areas such as entryways and hallways, or stairs.

Set the SmartMix dial to High Traffic.

1.

2. Set ReadyTools dial to PreTreat.

Plug into a proper outlet and turn ON both the Power

3. and SmartTemp switches.

EXIT	9
	10
12	11
	7	3'
		1
	6	START
5	2	HERE
		4'
	3
4

Tip:

Try pre-treating stairs or entry ways with BISSELL Tough Stain PreCleaner™. Then deep clean with the SmartMix®

10

While pressing the trigger, slowly make several passes

4. over the area to be cleaned. Caution: Do not overwet.

Turn the machine Power switches OFF and let BISSELL

5. Deep Cleaning Formula dissolve the tough soil for 1-2 minutes before continuing.

TOUGH STAIN
PRECLEANER	™
Penetrates and Loosens Tough	Stains
& Embedded Dirt before Deep Cle a inng

dial set on High Traffic.