Bissell 7901 Bare Floor Cleaning Technique, Routine Maintenance, thoroughly, dry and store

Turn Power and SmartTemp switches OFF.

Unplug power cord from the outlet and coil around Power Cord Quick Release.

Remove and rinse tools in clean, running water, dry and replace tool caddy.

Coil flex hose around storage brackets on tool caddy.

Remove Tank-In-Tank, dispose of dirty water. See Features section, Page 7-9.

Bare Floor Cleaning Technique

		Slowly move the machine nozzle with Bare Floor Tool
1.
		forward and back over soiled surface one time while
		pressing the trigger. Caution: Do not over wet.
		Repeat the motion without pressing the trigger using the Bare
2.
		Floor Tool to squeegee and suction up the dirty water.
		Repeat steps 1 and 2 backing along the exit path.
3.
		Allow about 30 minutes for the floor to dry completely.
	4.
		When the cleaning job is complete refer to the
5.
		Maintenance/Storage section on page 17-20.
6.		To remove Bare Floor Tool gently bend long tab (right side)
		outward and pull tool down away from nozzle. Rinse

thoroughly, dry and store

Routine Maintenance

1.

2.

3.

4.

5.

Rinse out Tank-In-Tank and replace on the machine; Clean out

6. lint trap.

Clean out the Flow Indicator Filter each time it is used to ensure

7. best cleaning performance. Unscrew the Flow Indicator Cap, lift out the red rotor and white filter. Rinse all three parts in tap water. Replace the filter and rotor. Replace the Flow Indicator Cap; turn until snug, do not over-tighten.

	Wipe all exterior surface with a soft cloth.
8.
	Store cleaner upright in a protected, dry area.
9.
	Note: ProHeat uses water and must not be stored

where there is a danger of freezing. Freezing will dam- age internal components and void the warranty.

When carpet is dry, vacuum again to remove hair and fuzz

10. that the ProHeat may have loosened.

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

Tip:

SmartMix Bottle may be stored with concentrate ready for your next cleaning job. Make sure dial is turned to the Water Rinse/ Carpet Protector Setting when storing.

Cap

Rotor

Filter

17