Bissell 7901 Cleaning Bare Floors, Attach the Bare Floor Tool, Machine Preparation, Machine Base

							Cleaning Bare Floors
							The Bare Floor Tool (available with select models only)
							provides effective cleaning for linoleum, vinyl, and tile floors.
							Caution: Do not use on hardwood floors.
1.							Use BISSELL Floor Cleansing Formula.
2.							Vacuum or sweep thoroughly to pick up loose debris and pet hair.
							Remove easily moved furniture from the room, (chairs, tables, etc.)
		3.
							Plan your cleaning route to leave an exit path.
		4.
							Plan activities to allow 30 minutes for the floor to dry completely.
	5.
						Attach the Bare Floor Tool
1.							Step on the handle release to lay the machine handle down.
2.							Remove the Tank-in-Tank from the machine base.
							Lift the machine base to expose the underside of the nozzle.
				3.
							Attach Bare Floor Tool to nozzle with long tab to the right side
				4.
							(ReadyTools side) of the nozzle.
							First attach left side (short Tab) catching tab over nozzle edge.
			5.
6.							Gently bend long tab (right side) outward to easily snap over
							edge of clear nozzle on left.
							Machine Preparation
1.							Set up machine following instructions in the Features
							section, pages 6-9. Be sure to thoroughly rinse out any
							remaining Fiber Cleansing Formula from the SmartMix bottle to
							prevent slippery linoleum, vinyl, and tile floors. Use BISSELL
							Floor Cleansing Formula in the SmartMix tank.
2.							Check ReadyTools dial - it should be set on Floor Cleaning.
							Choose the SmartMix setting to match the cleaning job.
					3.
4.							Plug into a proper outlet and turn Power Switch ON. Turn
							SmartTemp switch ON. The SmartTemp Ready Light illuminates

and the ProHeat is ready to clean.

16

Tilt

Handle

Back

Handle Release

Carrying

Bottom Front Edge of

Machine Base

Bare Floor	Snap Together
Cleaning Tool