Bissell 7901 When It’s Time to Empty Tank-in-Tank Continued, The Flow Indicator, ReadyTools Dial

Models: 7901

1 24
Download 24 pages 47 Kb
Page 9
Image 9
When It’s Time to Empty Tank-in-Tank Continued

When It’s Time to Empty Tank-in-Tank Continued

Remove Tank Lid by rotating handle forward to unlatch

3. lid and lifting lid off tank.

4. Pour out dirty water.

After each use, remove and rinse the lint screen located

5. on the tank lid.

A.Remove tank assembly from unit.

B.Remove tank lid.

C.Remove any debris caught in lint screen.

D.Reinsert lint screen on tank lid. The screen will click into place

E.Replace tank lid.

F.Reinsert tank assembly into unit.

Refill with clean tap water as above, steps 5 through 9

6. on page 8, and refill the SmartMix bottle with BISSELL Fiber Cleansing Formula as necessary.

When the cleaning job is complete, rinse out the

7. Tank-in-Tank by rinsing clean water between the bladder and tank.

Return Tank-in-Tank to the machine, following steps 6

8. through 9 on page 8.

Refer to the Maintenance section, pg. 17 for the

9. final cleanup.

The Flow Indicator

The Flow Indicator is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the floor. It will stop spinning to indicate that the SmartMix bottle or bladder needs to be refilled, or when the trigger is released. Flow Indicator does not spin when set to Tool setting.

ReadyTools Dial

This provides above floor cleaning with the flip of a switch. Just choose the cleaning tool or protector applicator, attach to the flex hose and ProHeat is ready to clean upholstery, stairs or apply extra protection against dirt and tough stains when using the Scotchgard protector applicator.*

*Set the dial to Floor Cleaning when cleaning carpets or bare floors or set it to Tools/PreTreat when using the flex hose attachments or for pre-treating floors, or when applying the Scotchgard protector applicator.

*SmartTemp heats the cleaning solution for carpet and bare floor application only. It does not heat solution sprayed through the accessory tools.

Pour out

3 Rotate Handle to 4 dirty water Unlatch

5C Lint Screen

5D

3

Fill bladder

6 only with clean 8 hot tap water

Latched

Tip:

A special red

 

float device

 

in the tank will

 

cause the cleaner

 

to stop removing

Tip:

solution from the

carpet and the

Thorough

motor sound will

vacuuming

rise in pitch to let

before deep

you know the

cleaning will

dirty water tank is

prevent early

full.

clogging of

 

 

lint trap.

Flow Indicator

ReadyTools Dial

9

Page 9
Image 9
Bissell 7901 warranty When It’s Time to Empty Tank-in-Tank Continued, The Flow Indicator, ReadyTools Dial