User Guide – BizTouch™ IP2
9.You can activate Remote Plug ‘n’ Play by entering the key (obtained from your System Administrator)
10.When finished, select the Softkey for EXIT.
Check the Current Status
1.Select the Softkey that corresponds to CONFIG on the screen.
2.Highlight Current Status/Info.
3.Press the Select button.
4.You can see the following information:
∙DHCP Lease Time (if DHCP is enabled)
∙SNTP Time Server IP
∙Boot Server IP
∙Phone IP
∙Subnet IP
∙Gateway IP
∙Boot Configuration success or failure
∙MAC Address
∙Model Name
∙Software Version
∙LAN Connection Info
∙PC Connection status
5.Use the Up and Down arrow buttons to move through the list.
6.When finished, press the Softkey that corresponds to EXIT.
Check Statistics
1.Select the Softkey that corresponds to CONFIG on the screen.
2.Highlight Statistics.
3.Press the Select button.
4.You can see the following information:
∙Audio Packet Stats
-RCV
-XMT
-Missed
-Avg Jitter
-Min Delay
-Max Delay
∙SIP Call Stats
-Incoming OK
50 Stiles Road • Salem, NH 03079 •
© 2004 InSciTek Micros ystems, Inc. All rights reserved. Bizfon is a registered trademark. All other names may be trademarks or registered trademarks of their respective owners
Revised: 31 January 2005 | Page 17 |
