User Guide – BizTouch™ IP2
WALL MOUNTING YOUR PHONE (OPTIONAL)
Your phone is wall mountable and requires a wall mounting plate. The mounting plates are available from your local telephone company or your local retailer.
CAUTION: If using a standard telephone wall mounting plate, DO NOT make any connection to the RJ 11 jack. This connection is intended for an analog phone and may cause damage to the BizTouch™ IP2 phone, voiding your warranty.
The mounting plate, similar to the one shown below, has mounting studs to receive the telephone base and is positioned to secure the BizTouch™ IP2 telephone flush to wall surface.
Collapse the BizTouch™ IP2 phone base to the horizontal position and mount the phone over the mounting plate studs. All power and RJ 45 cable connections should exit between the phone body and the phone base and then be routed to the network connection and/or a power connection.
Standard Telephone Wall Mounting Plate
50 Stiles Road • Salem, NH 03079 •
© 2004 InSciTek Micros ystems, Inc. All rights reserved. Bizfon is a registered trademark. All other names may be trademarks or registered trademarks of their respective owners
Revised: 31 January 2005 | Page 19 |
