CARTON CONTENTS
1
13
14
15
2
9
5
6
4
|
| 3 |
7 |
| 8 |
| 11 | |
| 10 | 12 |
|
|
16
17
18
1.Motor and Base
2.Disc Table
3.Belt and Pulley Guard
4.Disc Plate
5.Dust Chute
6.Support Rod
7.Lower Disc Guard
8.Sanding Disc
9.Backstop
10.Miter Gauge
11.1/8 in. Hex Wrench
12.6mm Hex Wrench
13.M8 x 1.25 x 20mm Hex Socket Head Screw (3)
14.M6 x 1 x 30mm Cheese Head Screws (2)
15.
16.M5 x .08 x 10mm Pan Head Screw w/washer (3)
17.M4 x .7 x 12mm Sheet Metal Screw (3)
18.5/16 in. Flat Washer (1)
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
ASSEMBLY
WARNING: For your own safety, do not connect the machine to the power source until the machine is completely assembled and you read and understand the entire instruction manual.
ASSEMBLY TOOLS REQUIRED
1/8 in. Hex Wrench (Supplied) | Phillips Screwdriver |
6 mm Hex Wrench (Supplied) | Adjustable Wrench |
ASSEMBLY TIME ESTIMATE
Less than one hour
7
