Black Box EncrypTight Enforcement Point (ETEP) Installation Guide manual Initial Setup, Overview

3 Initial Setup

This section includes the following topics:

●Overview

●Logging In Through a Serial Link

●Configuring the Management Port

●Setting the Date and Time

●Entering a Throughput License

●Configuration Example

●Managing the ETEP

Overview

The following steps are required for initial setup of the ETEP:

1Log in through a serial link.

2Configure the management port.

3Set the date and time.

4Enter the throughput license.

Logging In Through a Serial Link

Initial setup is performed through a serial link to the RS-232 port. The initial setup commands are available to the Admin and Ops users. The procedures and examples in this chapter assume that the Admin user is performing the setup tasks.

ETEP Installation Guide 47