Initial Setup
includes tools for appliance configuration, policy definition and deployment, and key generation and distribution.
To prepare the ETEP for operation in the network, you will need to perform the following tasks:
1Assign passwords
2Configure the ETEP
3Define security policies
If you plan to operate the ETEP in FIPS mode, we recommend enabling FIPS mode as your first configuration task. Entering FIPS mode resets many configuration items, such as passwords, policies, and certificates. To avoid having to reconfigure the ETEP, enable FIPS mode and then perform the rest of the appliance and policy configuration tasks.
See the user guide for your management software for details:
●ETEP CLI User Guide
●EncrypTight User Guide
54 | ETEP Installation Guide |
