Black Box EncrypTight Enforcement Point (ETEP) Installation Guide manual Before You Start

2 Installation

This section includes the following topics:

●Before You Start

●Installing the ET0010A

●Installing the ET0100A

●Installing the ET1000A

●Shutting Down the ETEP

Before You Start

Before you prepare the ETEP for installation, review the following information:

●“Safety Guidelines” on page 23

●“Software Requirements” on page 24

●“ETEP Site Preparation” on page 25

●“Firewall Ports” on page 26

Safety Guidelines

The ETEP does not contain any field-replaceable internal parts. Do not remove the unit’s cover for any reason. The cover is to be removed only by authorized Black Box service personnel.

Authorized service personnel should review the following safety information prior to performing service or maintenance procedures on the ETEP.

CAUTION

Disconnect all power cords before servicing.

ETEP Installation Guide 23