SERVSELECT III INSTALLER/USER GUIDE
14
4. Attach four cage nuts or clip nuts to the rackmounting flange of the rack cabinet so
that the nut is positioned on the inside of the rack.
NOTE:
Nuts are not included with the rackmount kit.
5. Mount the switch assembly to the rack cabinet by matching the holes in the “short
side” of each bracket to an appropriate set of matching holes on your rack cabinet.
6. Next, insert the combination hex head screws through the slots in the bracket and the
holes in the mounting rail, then into the cage nuts or clip nuts.
3.3 Installing the ServSelect III Switch
Plug the supplied power cord into the back of the appliance and then into an appropriate
power sour ce. Figure 2.1 illustrates one possible configuration for your ServSelect III switch.
CAUTION:
To reduce the risk of electric shock or damage to your equipment -
- Do not disable the power cord grounding plug. The grounding plug is an important safety fe ature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all tim es.
- Disconnect the power from the unit by unplugging the power cord from either the e lectrical outlet or the unit.